How to Replace Garmin NUVI 200 GPS device battery?
What do you do when your Garmin NUVI GPS device is no longer holding the charge, and the internal battery doesn’t last more than minutes? You could just live with it and use the vehicle power adapter. You can also send the device for the repair in the store. Or get the device battery replaced with following of the blog steps mentioned as it another option that turns out for replacing the internal battery is an easy task that just your time. You need the Garmin NUVI battery replacement kit which helps you in replacing the Garmin NUVI 200.
Steps to Get the Garmin NUVI 200 battery replaced:
Step 1: You need to take off the rear case using the sticker from the bottom of the device to reveal the screws.
Step 2: Next is you have to take off the T5 Torx screws
Step 3: You have to insert the plastic opening of the tool in the gap between the front and rear casing. And then carefully work the tool around the gap, separating the two halves of the case
Step 4: Peel off the tape holding the ribbon cable in place and disconnect the ribbon cable by using the spudger to flip up the retaining the flap on its ZIP-style connector and gently remove the cable
Step 5: Pull out the cable between the logic board and the speaker to disconnect them
Step 6: Remove the three screws from the logic board using the #00 Philips screwdriver and lift the board away from the case but do not pull the logic board completely off, as it is still attached to the battery by cable
Step 7: Detach the logic board from the battery by pulling out the cable
Step 8: With care and without using any sharp object around the battery pull it out from the case. As the battery is glued to the casing as well
With the completion of steps hence you can replace the battery successfully with the Garmin NUVI 200 device.